view shopping cart
1.888.ECO.MOWERS
Chat
ecomow - to mow without gas, and without noise, just a naturally clean cut
learn
buy
eco mower movement

Archive for the ‘Lawn Mowing Frequency’ Category

Recommended Turfgrass Mowing Heights

May 30th, 2009

Recommended Mowing Heights

The following reference chart is helpful for determining the proper height of cut for your reel mower.  It is also important to remember the “1/3rd” rule so that you do not stress the grass.

Species

Normal Weather

High-Temperature

Stress Period

Colonial bentgrass

0.30 – 0.80

0.50 – 0.80

Creeping bentgrass

0.125 – 0.80

0.188 – 0.80

Fine fescue

0.50 – 2.00

1.50 – 3.00

Kentucky bluegrass

1.50 – 2.25

2.25 – 3.00

Perennial ryegrass

1.50- 2.00

2.00 – 3.00

Tall fescue

1.75 – 3.00

2.50 – 3.50

Bermudagrass

0.25 – 1.50

NA

Bahiagrass

1.50 – 3.00

NA

Buffalograss

1.00 to unmowed

NA

Carpetgrass

1.00 – 3.00

NA

Centipedegrass

1.00 – 3.00

NA

Seashore paspalum

0.45 – 2.00

NA

St. Augustinegrass

3.00 – 4.00

NA

Zoysiagrass

0.50 – 2.00

NA

Source:

Christians, Nick, Fundamentals of Turfgrass Management: Ann Arbor Press, Chelsea, Michigan: 1998.

VN:F [1.3.4_676]
Rating: 10.0/10 (3 votes cast)

Measuring Lawn Mower Height Of Cut

May 30th, 2009

Measuring Your Lawn Mower’s Height of Cut

How do you determine more accurately what the true reel mower height of cut is?  On most residential and commercial turfgrass surfaces this is not an exact science.  Using three very simple steps it is possible to make close approximations with any push reel mower.

Step 1.

The height of cut (HOC) must be measured on a freshly mowed lawn.  Take a few minutes and push your reel mower using the height setting of your choice, or the setting of which you intend to measure.

Step 2.

Take out a ruler or a tape measure and push the end down into the grass until it sits firmly on the soil or on the thatch layer of the lawn.

Step 3.

While making sure the grass is standing upright measure to the top of a freshly mowed blade.  The resulting number will be the approximate height of cut that you are actually mowing at.  It is sometimes a good idea to measure 5+ grass blades using  the average length as the final HOC.


Suggested Mowing Heights

Species

Normal Weather

High-Temperature

Stress Periods

Colonial bentgrass

0.30 – 0.80

0.50 – 0.80

Creeping bentgrass

0.125 – 0.80

0.188 – 0.80

Fine fescue

0.50 – 2.00

1.50 – 3.00

Kentucky bluegrass

1.50 – 2.25

2.25 – 3.00

Perennial ryegrass

1.50- 2.00

2.00 – 3.00

Tall fescue

1.75 – 3.00

2.50 – 3.50

Bermudagrass

0.25 – 1.50

NA

Bahiagrass

1.50 – 3.00

NA

Buffalograss

1.00 to unmowed

NA

Carpetgrass

1.00 – 3.00

NA

Centipedegrass

1.00 – 3.00

NA

Seashore paspalum

0.45 – 2.00

NA

St. Augustinegrass

3.00 – 4.00

NA

Zoysiagrass

0.50 – 2.00

NA

Source:

Christians, Nick, Fundamentals of Turfgrass Management: Ann Arbor Press, Chelsea, Michigan: 1998.

VN:F [1.3.4_676]
Rating: 10.0/10 (1 vote cast)

Mowing Frequency – when should you mow?

May 13th, 2009

Your lawn will also respond to how frequently or infrequently it is mowed. Mowing too often places additional stress on the grass from water loss and soil compaction. Infrequent mowing, on the other hand, may result in scalping and a buildup of clippings on the surface that can contribute to disease and other problems (Christians, Nick, Fundamentals of Turfgrass Management: Ann Arbor Press, Chelsea, Michigan: 1998, page 150). If you stick to the guide of removing not more than 33 to 40% of the above ground plant tissue (and less during periods of stress), you will find the proper balance in mowing frequency for your lawn.

VN:F [1.3.4_676]
Rating: 10.0/10 (2 votes cast)

Managing Grass Clippings

May 13th, 2009

Managing Your Grass Clippings

Grass clippings will always be a part of lawn care. Because lawns grow at different rates depending on environmental conditions and management practices, it is important to tailor mowing, fertilizing, and watering to meet plant needs, yet avoid excessive growth. Grass clippings an inch or less in length filter down to the soil surface and decompose relatively quickly. Longer clippings have a tendency to remain above the lawn where they appear unsightly and can shade or smother grass beneath. Long clippings need to be removed to avoid both unsightliness and lawn damage.

Bagging clippings did not become commonplace until the 1950s when bagging attachments were designed for rotary motors. In nearly every instance, proper lawn care can greatly reduce or eliminate the need to collect clippings. In fact, clippings are a valuable source of nutrients. University of Minnesota soil test recommendations call for less nitrogen fertilizer if clippings are returned to the lawn. Also, the addition of organic matter in the form of clippings may help to improve the status of your soil if it is sandy or low in organic matter.

Contrary to popular belief, returning clippings to the lawn does not normally contribute to increased thatch formation. Thatch is a layer of undecomposed organic matter that builds up between the soil surface and the actively growing green vegetation. A thatch layer will develop if organic matter is produced faster than it is decomposed by microorganisms. The major factors contributing to thatch development are vigorous grass varieties, excessive nitrogen fertilization, infrequent mowing, and low soil oxygen levels. Small clippings are composed primarily of easily degradable compounds which break down rapidly and do not accumulate. Long clippings may contain wiry stem material that is slow to decompose.


Alternatives to Leaving Clippings

While leaving clippings on the lawn is recommended, certain instances make the practice inadvisable. The following are some exceptions to the rule:

If the lawn is heavily infested with certain leaf diseases, removing clippings may help reduce disease severity. If the lawn must be mowed when wet, clippings can mat together and smother the grass. If the grass has become too tall, clippings can mat together and smother the grass.

When clippings must be collected, using them as mulch in the garden or composting them are two good alternative disposal methods. Grass clippings can provide an effective mulch around garden plants. Mulching helps reduce weeds, conserve moisture, and modify soil temperatures. However, do not apply more than one or two inches of grass clippings as a mulch at one time. Wet grass clippings can mat down and prevent oxygen and moisture from getting down into the soil. When oxygen is limited, anaerobic decomposition of the clippings may take place, leading to the production of offensive odors. Do not use grassclippings as mulch if the lawn was recently treated with an herbicide for dandelions or other broadleaf types of weeds. If clippings are to be used as a mulch, then wait until its been mowed at least twice.

Composting involves mixing grass clippings and other plant materials with a small amount of soil containing microorganisms which decompose organic matter. Grass clippings are excellent additions to a compost pile because of their high nitrogen content. However, they should not be the only compost component. As with mulches, a thick layer of grass clippings in a compost pile will lead to bad odors from anaerobic decomposition. Mix them with dry materials such as leaves or straw. Clippings can be composted in the backyard or hauled to municipal composting sites.

Source:
“Managing Grass Clippings,” University of Minnesota, Sustainable Urban Landscape Information Series: http://www.sustland.umn.edu/maint/mowing.htm[accessed on May 6, 2008].

VN:F [1.3.4_676]
Rating: 5.5/10 (2 votes cast)

Page copy protected against web site content infringement by Copyscape
Environmental Elements, LLC
8525 S. Lakeview Ridge Trail, Traverse City, MI 49684 - 1-888-326-6693
Monday - Thursday 9am to 4pm (eastern standard time)
Cart Summary